夢騎士

人為什麼要活著?
到了80幾歲，還可以和自己年輕的死黨一起逐夢，克服重重困難，再次環島的過程，年輕的回憶湧現心頭，直到最後回到那個海灘，再次克服這個難關，這些珍貴的回憶，是沒有東西可以取代的，心靈上的富有!!

38度金門高粱

這廣告的涵義不錯，只要相信自己總有一天能做到的

遇到ESX DRS 掛掉出現的 Error

Unable to apply DRS resource settings on host 'csiesx01.abc.com.tw'  (Reason: A general system error occurred: Invalid Fault). This can significantly reduce the effectiveness of DRS.

1. Recreate the pools.xml file:
   1. Log in as root to the ESX host with an SSH client.
   2. Issue the command:
      # mv /etc/vmware/hostd/pools.xml /tmp
       
   3. Restart the management agents on the ESX host. For more information, see Restarting the Management agents on an ESX Server (1003490).
       
2. Check virtual machines for pending VMware Tools installations and cancel them.
3. If there are no pending VMware Tools installations found, you may have to manually install VPXA.
   
   To manually install the VPX Agent, see Verifying and reinstalling the correct version of the VirtualCenter Server agents (1003714 )
   
   
   Caution: Ensure Automatic Startup/Shutdown of virtual machines is disabled before running this command or you risk rebooting the virtual machines. For more information, see Restarting hostd (mgmt-vmware) on ESX Server Hosts Restarts Hosted Virtual Machines Where Virtual Machine Startup/Shutdown is Enabled (1003312).
   
4. Remove the ESX host from the DRS cluster, then re-add it to the cluster:
   
   
       a.  Right-click on the host and click Disconnect in the VI Client.
       b.  Right-click on the host and click Remove.
       c.  Right-click on the cluster and click Add Host.
       d.  Follow the wizard prompts to re-add the host to the cluster.
    
5. Disable and re-enable DRS in the cluster:
   
   1. Right-click on the cluster and click Edit Settings.
   2. Deselect Enable VMware DRS. You receive a warning indicating that turning off DRS destroys all resource pools in the cluster.
   3. Click OK to turn off DRS and destroy all resource pools.
   4. Right-click on the cluster and click Edit Settings.
   5. Select Enable VMware DRS and click OK.

我第一步做完DRS就正常了XD 大概是management agents掛掉了吧


參考VMWARE KB
http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1004667